top of page


Flux Chamber Sampler Overview:

The Scentroid Flux chamber sampler (AKA Emission Isolation Flux Hood) is used to determine levels of emissions from solid or liquid surfaces. The SF450 has a 100% solid stainless steel construction to ensure zero cross contamination. Flotation is achieved using 4 stainless steel floats eliminating the need for rubber tubes or foam making the unit easy to clean and maintain.

Flux Chamber Sampler Applications:

Emission measurements from liquid surfaces such as settling tanks and off-spec ponds
Emission measurements from solid surfaces such as compost piles and sludge
Emission measurement from liquid active sources such as aerated lagoons
Ideal for sampling of corrosive sources e.g. with high benzene or H2S content
Ideal for field operations that require quick decontamination
Flux Chamber Sampler Basics of Operation

Connect the flux chamber sampler sweep airline to either nitrogen or zero air cylinder
Move the flux chamber sampler to sampling location
Allow time for the 2 air exchanges inside the chamber
Extract sample using a vacuum chamber
For aerated liquid sources, an air sweep may not be required

bottom of page