NS 510A outdoor temperature sensor IP65

Price on request

These resistance-type temperature sensors are intended for contact temperature measurement of gaseous substances. The plastic connection head is provided with a cable outlet bushing (terminal board is located in the head) or a connector. The standard temperature range in which the sensors are allowed to be utilised is -50 to 100 °C. The temperature sensors can be utilised for any control systems that are compatible with sensing element output signals or output signals quoted in the table of sensing element types. Easy mounting of the temperature sensor is ensured by the unique “S head” design invented by SENSIT s.r.o. The temperature sensors are designed to be operated in a chemically non-aggressive environment. ACCESSORIES lead-in connector CONEC 43-00092 connection cable with the straight-type RKT connector or with the rectangular-type RKWT connector DECLARATION, CERTIFICATION, CALIBRATION Manufacturer provides EU Declaration of Conformity. Calibration – The final metrological inspection – comparison with standards or working instruments – is carried out for all the products. Continuity of the standards and working measuring instruments is ensured within the meaning of the Section 5 of Act no.505/1990 on metrology. The manufacturer offers a possibility to supply the sensors calibrated in SENSIT s.r.o.’s laboratory (according to requirements of the EN ISO/IEC 17025 standard) or in an Accredited laboratory. Caution: the temperature sensors with the output 4–20 mA can be delivered with the new connection head only in the version A. SPECIFICATIONS DIMENSIONAL DRAFT WIRING DIAGRAM MODIFICATIONS DOWNLOAD Sensor type (K - with connector) NS 110x NS 110xK NS 111x NS 111xK NS 112x NS 112xK NS 310x NS 310xK NS 311x NS 311xK Type of sensing element Ni 1000/5000 Ni 1000/6180 Ni 891 Ni 10000/5000 Ni 10000/6180 Measuring range -50 to 100°C Maximum measuring DC current 1 mA 1 mA 1 mA 0.3 mA 0.3 mA Sensor type (K - with connector) NS 113x NS 113xK PTS 110x PTS 110xK PTS 210x PTS 210xK PTS 310x PTS 310xK HS 110x HS 110xK Type of sensing element T1 = Ni 226 PT 100/3850 PT 500/3850 PT 1000/3850 termistor NTC 20 kΩ Measuring range -50 to 100 °C Maximum measuring DC current 0.7 mA 3 mA 1.5 mA 1 mA 0.3 mW *) *) maximum power consumption Sensor type (K - with connector) NS 510A NS 510AK NS 710x NS 710xK Note Type of sensing element Pt 1000/3850 PT1000/3850 Output signal 4 to 20 mA 0 to 10 V Measuring renges -30 to 60 °C 0 to 35 °C 0 to 100 °C 0 to 150 °C -30 to 60 °C 0 to 35 °C 0 to 100 °C 0 to 150 °C Ambient temperature arround the connection -30 to 70 °C Power supply (U) 11 to 30 V DC 15 to 30 V DC Recommended value 24 V DC Load resistance Rz 150 Ω for power supply 12 VDC 700 Ω for power supply 24 VDC > 10kΩ Output signal - sensing elements braek > 24 mA > 10.5 mA Output signal - sensing element short < 3.5 mA ~ 0 V Note: x = version A or version B **)According to the customer‘s requirement, it is possible to provide a customized measuring range from -40 to 150 °C; the minimum span of the range must be 35 °C (e.g. -20 to 15 °C; -30 to 80 °C) OTHER PARAMETERS Accuracy class Ni sensing elements: B class, t = ± (0.4 + 0.007t), for t ≥ 0; t = ± (0.4 + 0.028|t|), for t ≤ 0 in °C; Pt sensing elements: B class according EN 60751, t = ± (0.3 + 0.005|t|) in °C NTC 20 kΩ: ± 1 °C for the range 0 to 70 °C Measuring error NS 510A(K), NS 710x(K) NS 510A ± 1 °C (based on air flow speed) NS 710A 0,6 % for range with span; min. 0,5 °C Sensors connection according to the wiring diagram Standard length of the stem (version A) for resistance output and for output 0 to 10 V : 25 mm for output 4 to 20 mA : 50 mm Time response τ0.5 < 9 s (in air flow at 1m s-1) – version A τ0.5 ≤ 30 s (in air flow at 1m s-1) – version B Recommended wire cross section – sensors with grommet 0.35 to 1.5 mm2 Type of connector in the head – sensor with connector RSFM4 - Lumberg Insulation resistance > 200 MΩ at 500 V DC, 25° ± 3 °C; humidity < 85 % Ingress protection IP 65 in accordance with EN 60529 Material of the stem stainless steel DIN 1.4301 – version A Material of the connection head POLYAMIDE Operating conditions ambient temperature: -50 to 100 °C; -30 to 70 °C with a converter relative humidity: max. 100 % (at the ambient temperature 25 °C) atmospheric pressure: 70 to 107 kPa Weight approximately 0.15 kg