TR8 PLUS
POLLUTRACKER

Overview:

The Scentroid TR8 Plus Pollutracker is a complete air quality monitor and mobile laboratory. Users can measure ambient air quality & greenhouse gases due to it using up to 10 sensors and analyzers including photo-ionization detectors (PID) sensors, non-dispersive Infrared (NDIR) sensors, electrochemical, and metal oxide sensors. Each Pollutracker includes a built-in 10″ touchscreen interface, on-device data logging, wireless transfer via email, remote (internet-based) firmware updates, built-in sampling pump, simultaneous data analysis of gases, built-in rechargeable battery, and an on-screen calibration procedure.

Also Includes a sampling pump and Scentroid’s Pollutracker tracker application that can be loaded to any customer supplied Android phone/tablet. Two chemical sensors can be specified at the time of ordering. For each sample location, Scentroid instantaneously records:

Concentration of two chemical vapours in ppm or ppb depending on sensors ordered
Temperature and humidity
GPS position of each measurement
Continuously for remote monitoring via Bluetooth
Pollutracker TR8+ Applications:

Measure ambient H2S, Ammonia, Total VOC, and other chemical concentrations
Determine H2S, Ammonia, VOCs, and other chemicals emissions from various types of sources
Determine emission trends through 24+ hour data logging
Verify sample loss due to transportation
Validate dispersion models through emission measurements

Pollutracker TR8+ Basics of Operation:

Connect to Pollutracker via Bluetooth
See chemical readings live
Take snapshot readings of H2S, Ammonia, VOCs, another chemical compositions, GPS position, Temperature, and humidity.
Activate recording for continuous data logging
Export data for reporting and post analysis

Pollutracker TR8+ Capabilities:

The Scentroid Pollutracker includes a sampling pump with adjustable sampling rate, up to 10 chemical sensors that are specified at the time of ordering, and Scentroid’s Pollutracker Application that can be loaded to any customer supplied Android phone/tablet. For each sample location, Scentroid instantaneously records:

The concentration of up to 10 chemical vapours in ppm or ppb depending on sensors ordered
Measure Temperature and Humidity
Record GPS position of each measurement
Measure directly from ambient air
Can record continuously for remote monitoring via Bluetooth

TR8 Plus pollutracker can also be used as the perfect tool for flue analysis! Using the TR8 plus can provide an effective way to gather reliable combustion data through the measuring of temperature, oxygen, and carbon dioxide. *Make sure the usage purpose is specified at time of ordering, to allow the Scentroid staff to create the perfect combination of sensors for your needs.

Flexible and Cost Effective Solution:

The Scentroid Pollutracker Plus builds on the established Odotracker by providing extended number of sensors. This instrument can measure all common contaminants including: SO2, CO, CO2, H2S, Methane, VOCs, Ethelene, PM2.5, PM10, and more. The chemicals and the range are selectable at the time of ordering.